G
George Potemkin
Guest
Solution: 18723 Type: L Title: Report Builder, 1150 when converting reports from v7 Written by cfe 06/04/99 Report Builder, 1150 when converting reports from v7 DRAFT COPY - Currently under review and edit. INTRODUCTION: ============= In cases that the report has been developed against a Novell database the error message 1150: Server has -Mm parm and client has . They must match. might appear. WHY YOU NEED TO KNOW THIS: =========================== As the -Mm is stored internally in the report it is reset to this setting every time the report has failed. This k-base should provide steps to get around the message. PROCEDURAL APPROACH: ==================== Check if the following subtree exist, if not create it: HKEY_LOCAL_MACHINE\Software\PSC\PROGRESS\(8.X/9.X)\RBSTARTUP\ Create the string value: RBSTARTUP with value: "%DLC%\rpstartup.pf" where %DLC% is your path to the rbstartup.pf In the rbstartup.pf add the following: -db database name -ld TEST -N TCP -S servicename -H hostname -Mm 1024 Should the 1150 error still appear, the start the database with the -Mm 512 and connect with each report in the newer Progress version and do the convert (open&save). Then start the database again with -Mm 1024 or whatever is used. This will allow the reports to be used in the newer Progress verision. REFERENCES TO WRITTEN DOCUMENTATION: ==================================== CFE 6/4-99
Continue reading...
Continue reading...